KVR16LS11/8

 

 

SPECIFICATIONS

CL(IDD) : 11 cycles

Row Cycle Time (tRCmin) : 48.125ns (min.)

Refresh to Active/Refresh : 260ns (min.)

Command Time (tRFCmin)

Row Active Time (tRASmin) : 35ns (min.)

UL Rating : 94 V - 0

Operating Temperature : 0o C to 85o C

Storage Temperature : -55o C to +100oC

 

 

FEATURES

JEDEC standard 1.35V and 1.5V Power Supply

VDDQ = 1.35V and 1.5V

800MHz fCK for 1600Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]

Bi-directional Differential Data Strobe

Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C

Asynchronous Reset

PCB: Height 1.18” (30mm), double sided component

To see a printable version of this Item Click here.